|
|
1. Installation of the main tools used : screwdriver(+)¡¢screwdriver(-)Clamps ¡¢tape. |
|
|
2. Minimum size is 290MM. |
|
| |
3. Size of the maximum is 370MM. |
According to regulation£¬the size of the car sun-visor monitor appropriate the size of the rotation axis.
* Use hands to adjust rotation axis on the both sides.
|
|
| 4. Confirm the location of installation of the original monitor. |
|
| |
5.
Unload the original sun-visor board. |
| |
|
| |
6.
Unload the original sun-visor board. |
|
| |
7. Discard the plastic-shell edge of the door, insert the wiring of sun-visor monitor. |
|
| |
8.
Discard the plastic-shell edge of the door, insert the wiring of sun-visor monitor. |
|
| |
9.
Stabbed plastic-gasket with screwdriver. |
|
| |
10. Stall sun-visor monitor through the plastic-gasket first. |
|
| |
11. Fix the sun-visor monitor with screwdriver. |
|
| |
| 12.
The wiring of sun-visor monitor and Power Line in the car linked up with tape affixed. |
|
| |
| 13. Line should be hidden with Buckle along the edge. |
|
| |
14. Put Distributor link OK, hidden in the vehicle's carpet, or in other places where are not easily to be seen. |
|
| |
15.Confirm the power line of sun-visor monitor connected correct;then confirm the screen images and other normal functions are OK. Completed until the installation of no abnormality. |
|
| |
